dmesg - ASUS K45VM

Return To ASUS K45VM System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-22-generic (buildd@komainu) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #34-Ubuntu SMP Tue Jan 8 21:47:00 UTC 2013 (Ubuntu 3.5.0-22.34-generic 3.5.7.2)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000c8ea2fff] usable
BIOS-e820: [mem 0x00000000c8ea3000-0x00000000c9111fff] reserved
BIOS-e820: [mem 0x00000000c9112000-0x00000000c9532fff] ACPI NVS
BIOS-e820: [mem 0x00000000c9533000-0x00000000c95bafff] reserved
BIOS-e820: [mem 0x00000000c95bb000-0x00000000c983afff] ACPI NVS
BIOS-e820: [mem 0x00000000c983b000-0x00000000c983ffff] ACPI data
BIOS-e820: [mem 0x00000000c9840000-0x00000000c9882fff] ACPI NVS
BIOS-e820: [mem 0x00000000c9883000-0x00000000c9c80fff] usable
BIOS-e820: [mem 0x00000000c9c81000-0x00000000c9ff4fff] reserved
BIOS-e820: [mem 0x00000000c9ff5000-0x00000000c9ffffff] usable
BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi:  ACPI=0xc97d1000  ACPI 2.0=0xc97d1000  SMBIOS=0xf0480  MPS=0xfc910 
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000004e000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000004e000-0x0000000000060000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem05: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002450000) (20MB)
efi: mem07: type=7, attr=0xf, range=[0x0000000002450000-0x0000000008000000) (91MB)
efi: mem08: type=4, attr=0xf, range=[0x0000000008000000-0x0000000008847000) (8MB)
efi: mem09: type=3, attr=0xf, range=[0x0000000008847000-0x0000000008849000) (0MB)
efi: mem10: type=4, attr=0xf, range=[0x0000000008849000-0x0000000008889000) (0MB)
efi: mem11: type=3, attr=0xf, range=[0x0000000008889000-0x000000000888d000) (0MB)
efi: mem12: type=4, attr=0xf, range=[0x000000000888d000-0x0000000008893000) (0MB)
efi: mem13: type=3, attr=0xf, range=[0x0000000008893000-0x0000000008894000) (0MB)
efi: mem14: type=4, attr=0xf, range=[0x0000000008894000-0x0000000008895000) (0MB)
efi: mem15: type=3, attr=0xf, range=[0x0000000008895000-0x00000000088a5000) (0MB)
efi: mem16: type=4, attr=0xf, range=[0x00000000088a5000-0x0000000008ca6000) (4MB)
efi: mem17: type=3, attr=0xf, range=[0x0000000008ca6000-0x0000000008ca7000) (0MB)
efi: mem18: type=4, attr=0xf, range=[0x0000000008ca7000-0x0000000008cad000) (0MB)
efi: mem19: type=3, attr=0xf, range=[0x0000000008cad000-0x0000000008cae000) (0MB)
efi: mem20: type=4, attr=0xf, range=[0x0000000008cae000-0x0000000008cb2000) (0MB)
efi: mem21: type=3, attr=0xf, range=[0x0000000008cb2000-0x0000000008cb3000) (0MB)
efi: mem22: type=4, attr=0xf, range=[0x0000000008cb3000-0x0000000008cb8000) (0MB)
efi: mem23: type=3, attr=0xf, range=[0x0000000008cb8000-0x0000000008cb9000) (0MB)
efi: mem24: type=4, attr=0xf, range=[0x0000000008cb9000-0x0000000008cba000) (0MB)
efi: mem25: type=3, attr=0xf, range=[0x0000000008cba000-0x0000000008cbd000) (0MB)
efi: mem26: type=4, attr=0xf, range=[0x0000000008cbd000-0x0000000008cbf000) (0MB)
efi: mem27: type=3, attr=0xf, range=[0x0000000008cbf000-0x0000000008cc0000) (0MB)
efi: mem28: type=4, attr=0xf, range=[0x0000000008cc0000-0x0000000008ccc000) (0MB)
efi: mem29: type=3, attr=0xf, range=[0x0000000008ccc000-0x0000000008cd0000) (0MB)
efi: mem30: type=4, attr=0xf, range=[0x0000000008cd0000-0x0000000008cd1000) (0MB)
efi: mem31: type=3, attr=0xf, range=[0x0000000008cd1000-0x0000000008cd2000) (0MB)
efi: mem32: type=4, attr=0xf, range=[0x0000000008cd2000-0x0000000008cde000) (0MB)
efi: mem33: type=3, attr=0xf, range=[0x0000000008cde000-0x0000000008ce1000) (0MB)
efi: mem34: type=4, attr=0xf, range=[0x0000000008ce1000-0x0000000008ce2000) (0MB)
efi: mem35: type=3, attr=0xf, range=[0x0000000008ce2000-0x0000000008ce4000) (0MB)
efi: mem36: type=4, attr=0xf, range=[0x0000000008ce4000-0x0000000008ce6000) (0MB)
efi: mem37: type=3, attr=0xf, range=[0x0000000008ce6000-0x0000000008ce7000) (0MB)
efi: mem38: type=4, attr=0xf, range=[0x0000000008ce7000-0x0000000008cf6000) (0MB)
efi: mem39: type=3, attr=0xf, range=[0x0000000008cf6000-0x0000000008cf7000) (0MB)
efi: mem40: type=4, attr=0xf, range=[0x0000000008cf7000-0x0000000008cff000) (0MB)
efi: mem41: type=3, attr=0xf, range=[0x0000000008cff000-0x0000000008d03000) (0MB)
efi: mem42: type=4, attr=0xf, range=[0x0000000008d03000-0x0000000008d0b000) (0MB)
efi: mem43: type=3, attr=0xf, range=[0x0000000008d0b000-0x0000000008d0e000) (0MB)
efi: mem44: type=4, attr=0xf, range=[0x0000000008d0e000-0x0000000008d13000) (0MB)
efi: mem45: type=3, attr=0xf, range=[0x0000000008d13000-0x0000000008d14000) (0MB)
efi: mem46: type=4, attr=0xf, range=[0x0000000008d14000-0x0000000008d16000) (0MB)
efi: mem47: type=3, attr=0xf, range=[0x0000000008d16000-0x0000000008d1a000) (0MB)
efi: mem48: type=4, attr=0xf, range=[0x0000000008d1a000-0x0000000008d7e000) (0MB)
efi: mem49: type=3, attr=0xf, range=[0x0000000008d7e000-0x0000000008d7f000) (0MB)
efi: mem50: type=4, attr=0xf, range=[0x0000000008d7f000-0x0000000008d80000) (0MB)
efi: mem51: type=3, attr=0xf, range=[0x0000000008d80000-0x0000000008d81000) (0MB)
efi: mem52: type=4, attr=0xf, range=[0x0000000008d81000-0x0000000008d8b000) (0MB)
efi: mem53: type=3, attr=0xf, range=[0x0000000008d8b000-0x0000000008d90000) (0MB)
efi: mem54: type=4, attr=0xf, range=[0x0000000008d90000-0x0000000008da6000) (0MB)
efi: mem55: type=3, attr=0xf, range=[0x0000000008da6000-0x0000000008da7000) (0MB)
efi: mem56: type=4, attr=0xf, range=[0x0000000008da7000-0x0000000008da9000) (0MB)
efi: mem57: type=3, attr=0xf, range=[0x0000000008da9000-0x0000000008db3000) (0MB)
efi: mem58: type=4, attr=0xf, range=[0x0000000008db3000-0x0000000008dc2000) (0MB)
efi: mem59: type=3, attr=0xf, range=[0x0000000008dc2000-0x0000000008dc6000) (0MB)
efi: mem60: type=4, attr=0xf, range=[0x0000000008dc6000-0x0000000008dcf000) (0MB)
efi: mem61: type=3, attr=0xf, range=[0x0000000008dcf000-0x0000000008ddb000) (0MB)
efi: mem62: type=4, attr=0xf, range=[0x0000000008ddb000-0x0000000008ded000) (0MB)
efi: mem63: type=3, attr=0xf, range=[0x0000000008ded000-0x0000000008df1000) (0MB)
efi: mem64: type=4, attr=0xf, range=[0x0000000008df1000-0x0000000008df8000) (0MB)
efi: mem65: type=3, attr=0xf, range=[0x0000000008df8000-0x0000000008dfa000) (0MB)
efi: mem66: type=4, attr=0xf, range=[0x0000000008dfa000-0x0000000008dfb000) (0MB)
efi: mem67: type=3, attr=0xf, range=[0x0000000008dfb000-0x0000000008e00000) (0MB)
efi: mem68: type=4, attr=0xf, range=[0x0000000008e00000-0x0000000008e01000) (0MB)
efi: mem69: type=3, attr=0xf, range=[0x0000000008e01000-0x0000000008e02000) (0MB)
efi: mem70: type=4, attr=0xf, range=[0x0000000008e02000-0x0000000008e03000) (0MB)
efi: mem71: type=3, attr=0xf, range=[0x0000000008e03000-0x0000000008e05000) (0MB)
efi: mem72: type=4, attr=0xf, range=[0x0000000008e05000-0x0000000008e0f000) (0MB)
efi: mem73: type=3, attr=0xf, range=[0x0000000008e0f000-0x0000000008e15000) (0MB)
efi: mem74: type=4, attr=0xf, range=[0x0000000008e15000-0x0000000008e17000) (0MB)
efi: mem75: type=3, attr=0xf, range=[0x0000000008e17000-0x0000000008e19000) (0MB)
efi: mem76: type=4, attr=0xf, range=[0x0000000008e19000-0x0000000008e1b000) (0MB)
efi: mem77: type=3, attr=0xf, range=[0x0000000008e1b000-0x0000000008e1c000) (0MB)
efi: mem78: type=4, attr=0xf, range=[0x0000000008e1c000-0x0000000008e22000) (0MB)
efi: mem79: type=3, attr=0xf, range=[0x0000000008e22000-0x0000000008e24000) (0MB)
efi: mem80: type=4, attr=0xf, range=[0x0000000008e24000-0x0000000008e29000) (0MB)
efi: mem81: type=3, attr=0xf, range=[0x0000000008e29000-0x0000000008e2a000) (0MB)
efi: mem82: type=4, attr=0xf, range=[0x0000000008e2a000-0x0000000008e49000) (0MB)
efi: mem83: type=3, attr=0xf, range=[0x0000000008e49000-0x0000000008e56000) (0MB)
efi: mem84: type=4, attr=0xf, range=[0x0000000008e56000-0x0000000008e59000) (0MB)
efi: mem85: type=3, attr=0xf, range=[0x0000000008e59000-0x0000000008e5c000) (0MB)
efi: mem86: type=4, attr=0xf, range=[0x0000000008e5c000-0x0000000008e66000) (0MB)
efi: mem87: type=3, attr=0xf, range=[0x0000000008e66000-0x0000000008e68000) (0MB)
efi: mem88: type=4, attr=0xf, range=[0x0000000008e68000-0x0000000008e69000) (0MB)
efi: mem89: type=3, attr=0xf, range=[0x0000000008e69000-0x0000000008e6e000) (0MB)
efi: mem90: type=4, attr=0xf, range=[0x0000000008e6e000-0x0000000008e7d000) (0MB)
efi: mem91: type=3, attr=0xf, range=[0x0000000008e7d000-0x0000000008e83000) (0MB)
efi: mem92: type=4, attr=0xf, range=[0x0000000008e83000-0x0000000008e8d000) (0MB)
efi: mem93: type=3, attr=0xf, range=[0x0000000008e8d000-0x0000000008e90000) (0MB)
efi: mem94: type=4, attr=0xf, range=[0x0000000008e90000-0x0000000008e98000) (0MB)
efi: mem95: type=3, attr=0xf, range=[0x0000000008e98000-0x0000000008e9c000) (0MB)
efi: mem96: type=4, attr=0xf, range=[0x0000000008e9c000-0x0000000008e9f000) (0MB)
efi: mem97: type=3, attr=0xf, range=[0x0000000008e9f000-0x0000000008ea5000) (0MB)
efi: mem98: type=4, attr=0xf, range=[0x0000000008ea5000-0x0000000008ebb000) (0MB)
efi: mem99: type=3, attr=0xf, range=[0x0000000008ebb000-0x0000000008ec6000) (0MB)
efi: mem100: type=4, attr=0xf, range=[0x0000000008ec6000-0x0000000008ec7000) (0MB)
efi: mem101: type=3, attr=0xf, range=[0x0000000008ec7000-0x0000000008ec8000) (0MB)
efi: mem102: type=4, attr=0xf, range=[0x0000000008ec8000-0x0000000008ecc000) (0MB)
efi: mem103: type=3, attr=0xf, range=[0x0000000008ecc000-0x0000000008ece000) (0MB)
efi: mem104: type=4, attr=0xf, range=[0x0000000008ece000-0x0000000008ed5000) (0MB)
efi: mem105: type=3, attr=0xf, range=[0x0000000008ed5000-0x0000000008ed8000) (0MB)
efi: mem106: type=4, attr=0xf, range=[0x0000000008ed8000-0x0000000008ede000) (0MB)
efi: mem107: type=3, attr=0xf, range=[0x0000000008ede000-0x0000000008ee3000) (0MB)
efi: mem108: type=4, attr=0xf, range=[0x0000000008ee3000-0x0000000008efd000) (0MB)
efi: mem109: type=3, attr=0xf, range=[0x0000000008efd000-0x0000000008efe000) (0MB)
efi: mem110: type=4, attr=0xf, range=[0x0000000008efe000-0x0000000008f08000) (0MB)
efi: mem111: type=3, attr=0xf, range=[0x0000000008f08000-0x0000000008f0c000) (0MB)
efi: mem112: type=4, attr=0xf, range=[0x0000000008f0c000-0x0000000008f0f000) (0MB)
efi: mem113: type=3, attr=0xf, range=[0x0000000008f0f000-0x0000000008f23000) (0MB)
efi: mem114: type=4, attr=0xf, range=[0x0000000008f23000-0x0000000008f30000) (0MB)
efi: mem115: type=3, attr=0xf, range=[0x0000000008f30000-0x0000000008f38000) (0MB)
efi: mem116: type=4, attr=0xf, range=[0x0000000008f38000-0x0000000008f3a000) (0MB)
efi: mem117: type=3, attr=0xf, range=[0x0000000008f3a000-0x0000000008f3c000) (0MB)
efi: mem118: type=4, attr=0xf, range=[0x0000000008f3c000-0x0000000008f3f000) (0MB)
efi: mem119: type=3, attr=0xf, range=[0x0000000008f3f000-0x0000000008f54000) (0MB)
efi: mem120: type=4, attr=0xf, range=[0x0000000008f54000-0x0000000008f5c000) (0MB)
efi: mem121: type=3, attr=0xf, range=[0x0000000008f5c000-0x0000000008f61000) (0MB)
efi: mem122: type=4, attr=0xf, range=[0x0000000008f61000-0x0000000008f62000) (0MB)
efi: mem123: type=3, attr=0xf, range=[0x0000000008f62000-0x0000000008f68000) (0MB)
efi: mem124: type=4, attr=0xf, range=[0x0000000008f68000-0x0000000008f6e000) (0MB)
efi: mem125: type=3, attr=0xf, range=[0x0000000008f6e000-0x0000000008f75000) (0MB)
efi: mem126: type=4, attr=0xf, range=[0x0000000008f75000-0x0000000008f84000) (0MB)
efi: mem127: type=3, attr=0xf, range=[0x0000000008f84000-0x0000000008f89000) (0MB)
efi: mem128: type=4, attr=0xf, range=[0x0000000008f89000-0x0000000008f94000) (0MB)
efi: mem129: type=3, attr=0xf, range=[0x0000000008f94000-0x0000000008f96000) (0MB)
efi: mem130: type=4, attr=0xf, range=[0x0000000008f96000-0x0000000008f9c000) (0MB)
efi: mem131: type=3, attr=0xf, range=[0x0000000008f9c000-0x0000000008fa0000) (0MB)
efi: mem132: type=4, attr=0xf, range=[0x0000000008fa0000-0x0000000008fa6000) (0MB)
efi: mem133: type=3, attr=0xf, range=[0x0000000008fa6000-0x0000000008fb0000) (0MB)
efi: mem134: type=4, attr=0xf, range=[0x0000000008fb0000-0x0000000008fb6000) (0MB)
efi: mem135: type=3, attr=0xf, range=[0x0000000008fb6000-0x0000000008fbf000) (0MB)
efi: mem136: type=4, attr=0xf, range=[0x0000000008fbf000-0x0000000008fc1000) (0MB)
efi: mem137: type=3, attr=0xf, range=[0x0000000008fc1000-0x0000000008fc4000) (0MB)
efi: mem138: type=4, attr=0xf, range=[0x0000000008fc4000-0x0000000008fe1000) (0MB)
efi: mem139: type=3, attr=0xf, range=[0x0000000008fe1000-0x0000000008fe3000) (0MB)
efi: mem140: type=4, attr=0xf, range=[0x0000000008fe3000-0x0000000008fe5000) (0MB)
efi: mem141: type=3, attr=0xf, range=[0x0000000008fe5000-0x0000000008fe6000) (0MB)
efi: mem142: type=4, attr=0xf, range=[0x0000000008fe6000-0x0000000008fee000) (0MB)
efi: mem143: type=3, attr=0xf, range=[0x0000000008fee000-0x0000000009007000) (0MB)
efi: mem144: type=4, attr=0xf, range=[0x0000000009007000-0x0000000009030000) (0MB)
efi: mem145: type=3, attr=0xf, range=[0x0000000009030000-0x0000000009037000) (0MB)
efi: mem146: type=4, attr=0xf, range=[0x0000000009037000-0x0000000009038000) (0MB)
efi: mem147: type=3, attr=0xf, range=[0x0000000009038000-0x0000000009081000) (0MB)
efi: mem148: type=4, attr=0xf, range=[0x0000000009081000-0x0000000009082000) (0MB)
efi: mem149: type=3, attr=0xf, range=[0x0000000009082000-0x0000000009090000) (0MB)
efi: mem150: type=4, attr=0xf, range=[0x0000000009090000-0x0000000009091000) (0MB)
efi: mem151: type=3, attr=0xf, range=[0x0000000009091000-0x00000000090ac000) (0MB)
efi: mem152: type=4, attr=0xf, range=[0x00000000090ac000-0x00000000090bb000) (0MB)
efi: mem153: type=3, attr=0xf, range=[0x00000000090bb000-0x00000000090de000) (0MB)
efi: mem154: type=4, attr=0xf, range=[0x00000000090de000-0x00000000090e1000) (0MB)
efi: mem155: type=3, attr=0xf, range=[0x00000000090e1000-0x0000000009112000) (0MB)
efi: mem156: type=4, attr=0xf, range=[0x0000000009112000-0x0000000009114000) (0MB)
efi: mem157: type=3, attr=0xf, range=[0x0000000009114000-0x000000000912e000) (0MB)
efi: mem158: type=4, attr=0xf, range=[0x000000000912e000-0x0000000009141000) (0MB)
efi: mem159: type=3, attr=0xf, range=[0x0000000009141000-0x0000000009154000) (0MB)
efi: mem160: type=4, attr=0xf, range=[0x0000000009154000-0x0000000009156000) (0MB)
efi: mem161: type=3, attr=0xf, range=[0x0000000009156000-0x000000000915a000) (0MB)
efi: mem162: type=4, attr=0xf, range=[0x000000000915a000-0x000000000915b000) (0MB)
efi: mem163: type=3, attr=0xf, range=[0x000000000915b000-0x000000000915e000) (0MB)
efi: mem164: type=4, attr=0xf, range=[0x000000000915e000-0x000000000915f000) (0MB)
efi: mem165: type=3, attr=0xf, range=[0x000000000915f000-0x00000000091ea000) (0MB)
efi: mem166: type=4, attr=0xf, range=[0x00000000091ea000-0x00000000091f8000) (0MB)
efi: mem167: type=3, attr=0xf, range=[0x00000000091f8000-0x00000000091fa000) (0MB)
efi: mem168: type=4, attr=0xf, range=[0x00000000091fa000-0x00000000091fc000) (0MB)
efi: mem169: type=3, attr=0xf, range=[0x00000000091fc000-0x0000000009204000) (0MB)
efi: mem170: type=4, attr=0xf, range=[0x0000000009204000-0x000000000920e000) (0MB)
efi: mem171: type=3, attr=0xf, range=[0x000000000920e000-0x0000000009218000) (0MB)
efi: mem172: type=4, attr=0xf, range=[0x0000000009218000-0x0000000009254000) (0MB)
efi: mem173: type=3, attr=0xf, range=[0x0000000009254000-0x0000000009258000) (0MB)
efi: mem174: type=4, attr=0xf, range=[0x0000000009258000-0x0000000009259000) (0MB)
efi: mem175: type=3, attr=0xf, range=[0x0000000009259000-0x000000000926c000) (0MB)
efi: mem176: type=4, attr=0xf, range=[0x000000000926c000-0x0000000009297000) (0MB)
efi: mem177: type=3, attr=0xf, range=[0x0000000009297000-0x00000000092a4000) (0MB)
efi: mem178: type=4, attr=0xf, range=[0x00000000092a4000-0x00000000092a7000) (0MB)
efi: mem179: type=3, attr=0xf, range=[0x00000000092a7000-0x00000000092aa000) (0MB)
efi: mem180: type=4, attr=0xf, range=[0x00000000092aa000-0x00000000092c0000) (0MB)
efi: mem181: type=3, attr=0xf, range=[0x00000000092c0000-0x00000000092ed000) (0MB)
efi: mem182: type=4, attr=0xf, range=[0x00000000092ed000-0x00000000092f7000) (0MB)
efi: mem183: type=3, attr=0xf, range=[0x00000000092f7000-0x00000000092f8000) (0MB)
efi: mem184: type=4, attr=0xf, range=[0x00000000092f8000-0x0000000012fba000) (156MB)
efi: mem185: type=3, attr=0xf, range=[0x0000000012fba000-0x0000000012fbb000) (0MB)
efi: mem186: type=4, attr=0xf, range=[0x0000000012fbb000-0x0000000012fcb000) (0MB)
efi: mem187: type=3, attr=0xf, range=[0x0000000012fcb000-0x0000000012fce000) (0MB)
efi: mem188: type=4, attr=0xf, range=[0x0000000012fce000-0x000000001314c000) (1MB)
efi: mem189: type=3, attr=0xf, range=[0x000000001314c000-0x000000001314f000) (0MB)
efi: mem190: type=4, attr=0xf, range=[0x000000001314f000-0x0000000013155000) (0MB)
efi: mem191: type=3, attr=0xf, range=[0x0000000013155000-0x0000000013162000) (0MB)
efi: mem192: type=4, attr=0xf, range=[0x0000000013162000-0x00000000131a7000) (0MB)
efi: mem193: type=3, attr=0xf, range=[0x00000000131a7000-0x00000000131ab000) (0MB)
efi: mem194: type=4, attr=0xf, range=[0x00000000131ab000-0x00000000131e9000) (0MB)
efi: mem195: type=7, attr=0xf, range=[0x00000000131e9000-0x00000000131ea000) (0MB)
efi: mem196: type=4, attr=0xf, range=[0x00000000131ea000-0x00000000131f2000) (0MB)
efi: mem197: type=7, attr=0xf, range=[0x00000000131f2000-0x00000000131f8000) (0MB)
efi: mem198: type=4, attr=0xf, range=[0x00000000131f8000-0x0000000013284000) (0MB)
efi: mem199: type=7, attr=0xf, range=[0x0000000013284000-0x0000000013292000) (0MB)
efi: mem200: type=4, attr=0xf, range=[0x0000000013292000-0x0000000013453000) (1MB)
efi: mem201: type=7, attr=0xf, range=[0x0000000013453000-0x0000000013472000) (0MB)
efi: mem202: type=1, attr=0xf, range=[0x0000000013472000-0x0000000013490000) (0MB)
efi: mem203: type=7, attr=0xf, range=[0x0000000013490000-0x0000000020000000) (203MB)
efi: mem204: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
efi: mem205: type=7, attr=0xf, range=[0x0000000020200000-0x00000000353aa000) (337MB)
efi: mem206: type=2, attr=0xf, range=[0x00000000353aa000-0x00000000369cd000) (22MB)
efi: mem207: type=7, attr=0xf, range=[0x00000000369cd000-0x0000000040004000) (150MB)
efi: mem208: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
efi: mem209: type=7, attr=0xf, range=[0x0000000040005000-0x0000000099913000) (1433MB)
efi: mem210: type=2, attr=0xf, range=[0x0000000099913000-0x00000000c8ea3000) (757MB)
efi: mem211: type=5, attr=0x800000000000000f, range=[0x00000000c8ea3000-0x00000000c8ea5000) (0MB)
efi: mem212: type=0, attr=0xf, range=[0x00000000c8ea5000-0x00000000c8fb8000) (1MB)
efi: mem213: type=5, attr=0x800000000000000f, range=[0x00000000c8fb8000-0x00000000c8fd1000) (0MB)
efi: mem214: type=6, attr=0x800000000000000f, range=[0x00000000c8fd1000-0x00000000c8fde000) (0MB)
efi: mem215: type=5, attr=0x800000000000000f, range=[0x00000000c8fde000-0x00000000c901a000) (0MB)
efi: mem216: type=6, attr=0x800000000000000f, range=[0x00000000c901a000-0x00000000c907a000) (0MB)
efi: mem217: type=5, attr=0x800000000000000f, range=[0x00000000c907a000-0x00000000c9091000) (0MB)
efi: mem218: type=6, attr=0x800000000000000f, range=[0x00000000c9091000-0x00000000c90a0000) (0MB)
efi: mem219: type=6, attr=0x800000000000000f, range=[0x00000000c90a0000-0x00000000c90bb000) (0MB)
efi: mem220: type=0, attr=0xf, range=[0x00000000c90bb000-0x00000000c9102000) (0MB)
efi: mem221: type=0, attr=0xf, range=[0x00000000c9102000-0x00000000c9112000) (0MB)
efi: mem222: type=10, attr=0xf, range=[0x00000000c9112000-0x00000000c9533000) (4MB)
efi: mem223: type=0, attr=0xf, range=[0x00000000c9533000-0x00000000c9550000) (0MB)
efi: mem224: type=0, attr=0xf, range=[0x00000000c9550000-0x00000000c9556000) (0MB)
efi: mem225: type=0, attr=0xf, range=[0x00000000c9556000-0x00000000c95bb000) (0MB)
efi: mem226: type=10, attr=0xf, range=[0x00000000c95bb000-0x00000000c9749000) (1MB)
efi: mem227: type=10, attr=0xf, range=[0x00000000c9749000-0x00000000c9805000) (0MB)
efi: mem228: type=10, attr=0xf, range=[0x00000000c9805000-0x00000000c9816000) (0MB)
efi: mem229: type=10, attr=0xf, range=[0x00000000c9816000-0x00000000c9820000) (0MB)
efi: mem230: type=10, attr=0xf, range=[0x00000000c9820000-0x00000000c9825000) (0MB)
efi: mem231: type=10, attr=0xf, range=[0x00000000c9825000-0x00000000c983b000) (0MB)
efi: mem232: type=9, attr=0xf, range=[0x00000000c983b000-0x00000000c983f000) (0MB)
efi: mem233: type=9, attr=0xf, range=[0x00000000c983f000-0x00000000c9840000) (0MB)
efi: mem234: type=10, attr=0xf, range=[0x00000000c9840000-0x00000000c9883000) (0MB)
efi: mem235: type=4, attr=0xf, range=[0x00000000c9883000-0x00000000c99c8000) (1MB)
efi: mem236: type=3, attr=0xf, range=[0x00000000c99c8000-0x00000000c9c56000) (2MB)
efi: mem237: type=4, attr=0xf, range=[0x00000000c9c56000-0x00000000c9c65000) (0MB)
efi: mem238: type=3, attr=0xf, range=[0x00000000c9c65000-0x00000000c9c77000) (0MB)
efi: mem239: type=4, attr=0xf, range=[0x00000000c9c77000-0x00000000c9c78000) (0MB)
efi: mem240: type=3, attr=0xf, range=[0x00000000c9c78000-0x00000000c9c7a000) (0MB)
efi: mem241: type=4, attr=0xf, range=[0x00000000c9c7a000-0x00000000c9c81000) (0MB)
efi: mem242: type=6, attr=0x800000000000000f, range=[0x00000000c9c81000-0x00000000c9ff5000) (3MB)
efi: mem243: type=4, attr=0xf, range=[0x00000000c9ff5000-0x00000000ca000000) (0MB)
efi: mem244: type=7, attr=0xf, range=[0x0000000100000000-0x000000022fe00000) (4862MB)
efi: mem245: type=0, attr=0x8000000000000000, range=[0x00000000cb000000-0x00000000cf200000) (66MB)
efi: mem246: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
efi: mem247: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem248: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
efi: mem249: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem250: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
efi: mem251: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
DMI 2.7 present.
DMI: ASUSTeK COMPUTER INC. K45VM/K45VM, BIOS 216 07/20/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D3FFF write-protect
  D4000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask E00000000 write-back
  1 base 200000000 mask FE0000000 write-back
  2 base 220000000 mask FF0000000 write-back
  3 base 0E0000000 mask FE0000000 uncachable
  4 base 0D0000000 mask FF0000000 uncachable
  5 base 0CC000000 mask FFC000000 uncachable
  6 base 0CB000000 mask FFF000000 uncachable
  7 base 22FE00000 mask FFFE00000 uncachable
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 512MB, type WB
reg 2, base: 8704MB, range: 256MB, type WB
reg 3, base: 3584MB, range: 512MB, type UC
reg 4, base: 3328MB, range: 256MB, type UC
reg 5, base: 3264MB, range: 64MB, type UC
reg 6, base: 3248MB, range: 16MB, type UC
reg 7, base: 8958MB, range: 2MB, type UC
total RAM covered: 8110M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 4M 	num_reg: 9  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 128MB, type WB
reg 3, base: 3200MB, range: 32MB, type WB
reg 4, base: 3232MB, range: 16MB, type WB
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 512MB, type WB
reg 7, base: 8704MB, range: 256MB, type WB
reg 8, base: 8958MB, range: 2MB, type UC
e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc20-0x000fcc2f] mapped at [ffff8800000fcc20]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0xc9ffffff]
 [mem 0x00000000-0xc9ffffff] page 2M
kernel direct mapping tables up to 0xc9ffffff @ [mem 0x1fffb000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x22fdfffff]
 [mem 0x100000000-0x22fdfffff] page 2M
kernel direct mapping tables up to 0x22fdfffff @ [mem 0xc8e9d000-0xc8ea2fff]
RAMDISK: [mem 0x353aa000-0x369ccfff]
ACPI: RSDP 00000000c97d1000 00024 (v02 _ASUS_)
ACPI: XSDT 00000000c97d1080 0007C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FACP 00000000c97df620 000F4 (v04 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: DSDT 00000000c97d1190 0E490 (v02 _ASUS_ Notebook 00000117 INTL 20091112)
ACPI: FACS 00000000c982ff80 00040
ACPI: APIC 00000000c97df718 00092 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: MCFG 00000000c97df7b0 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
ACPI: SSDT 00000000c97df7f0 006E9 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
ACPI: HPET 00000000c97dfee0 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: SSDT 00000000c97dff18 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000c97e0288 008E4 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000c97e0b70 00A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
ACPI: SSDT 00000000c97e1608 0075D (v01  SgRef   SgTabl 00001000 INTL 20051117)
ACPI: SSDT 00000000c97e1d68 013CA (v01 OptRef  OptTabl 00001000 INTL 20051117)
ACPI: SLIC 00000000c97e3138 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
Initmem setup node 0 [mem 0x00000000-0x22fdfffff]
  NODE_DATA [mem 0x22fdfc000-0x22fdfffff]
 [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227400000-ffff88022f3fffff] on node 0
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x22fdfffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009efff]
  node   0: [mem 0x00100000-0x1fffffff]
  node   0: [mem 0x20200000-0x40003fff]
  node   0: [mem 0x40005000-0xc8ea2fff]
  node   0: [mem 0xc9883000-0xc9c80fff]
  node   0: [mem 0xc9ff5000-0xc9ffffff]
  node   0: [mem 0x100000000-0x22fdfffff]
On node 0 totalpages: 2068026
  DMA zone: 64 pages used for memmap
  DMA zone: 29 pages reserved
  DMA zone: 3890 pages, LIFO batch:0
  DMA32 zone: 16320 pages used for memmap
  DMA32 zone: 803051 pages, LIFO batch:31
  Normal zone: 19448 pages used for memmap
  Normal zone: 1225224 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040004000 - 0000000040005000
PM: Registered nosave memory: 00000000c8ea3000 - 00000000c9112000
PM: Registered nosave memory: 00000000c9112000 - 00000000c9533000
PM: Registered nosave memory: 00000000c9533000 - 00000000c95bb000
PM: Registered nosave memory: 00000000c95bb000 - 00000000c983b000
PM: Registered nosave memory: 00000000c983b000 - 00000000c9840000
PM: Registered nosave memory: 00000000c9840000 - 00000000c9883000
PM: Registered nosave memory: 00000000c9c81000 - 00000000c9ff5000
PM: Registered nosave memory: 00000000ca000000 - 00000000cb000000
PM: Registered nosave memory: 00000000cb000000 - 00000000cf200000
PM: Registered nosave memory: 00000000cf200000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88022fa00000 s83584 r8192 d22912 u262144
pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2032165
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7846748k/9172992k available (6719k kernel code, 900888k absent, 425356k reserved, 6451k data, 932k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2294.776 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.55 BogoMIPS (lpj=9179104)
pid_max: default: 32768 minimum: 301
init_memory_mapping: [mem 0xcb000000-0xcf1fffff]
 [mem 0xcb000000-0xcf1fffff] page 2M
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 25143 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz stepping 09
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (36716.41 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xc9112000-0xc9532fff] (4329472 bytes)
PM: Registering ACPI NVS region [mem 0xc95bb000-0xc983afff] (2621440 bytes)
PM: Registering ACPI NVS region [mem 0xc9840000-0xc9882fff] (274432 bytes)
dummy: 
RTC time: 14:07:16, date: 01/26/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000c9568018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000c9569a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000c956ac18 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xcf200000-0xfeafffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xf7400000-0xf77fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 10: [mem 0xf7900000-0xf790ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf791a000-0xf791a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf7918000-0xf79183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7910000-0xf7913fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf7917000-0xf79173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io  0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 14: [io  0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 18: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 1c: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]
pci 0000:00:1f.2: reg 24: [mem 0xf7916000-0xf79167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7915000-0xf79150ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io  0xd000-0xd0ff]
pci 0000:02:00.0: reg 18: [mem 0xf2104000-0xf2104fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf7800000-0xf787ffff 64bit]
pci 0000:03:00.0: reg 30: [mem 0xf7880000-0xf788ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [mem 0xf7800000-0xf78fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xc8ea3000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc9c81000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Freeing initrd memory: 22668k freed
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xcf200000-0xfeafffff window]
pnp 00:00: [mem 0x00010000-0x0001ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed40000-0xfed44fff]
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io  0x0000-0x001f]
pnp 00:02: [io  0x0081-0x0091]
pnp 00:02: [io  0x0093-0x009f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff010000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io  0x002e-0x002f]
pnp 00:05: [io  0x004e-0x004f]
pnp 00:05: [io  0x0061]
pnp 00:05: [io  0x0063]
pnp 00:05: [io  0x0065]
pnp 00:05: [io  0x0067]
pnp 00:05: [io  0x0070]
pnp 00:05: [io  0x0080]
pnp 00:05: [io  0x0092]
pnp 00:05: [io  0x00b2-0x00b3]
pnp 00:05: [io  0x0680-0x069f]
pnp 00:05: [io  0x0200-0x020f]
pnp 00:05: [io  0xffff]
pnp 00:05: [io  0xffff]
pnp 00:05: [io  0x0400-0x0453]
pnp 00:05: [io  0x0458-0x047f]
pnp 00:05: [io  0x0500-0x057f]
pnp 00:05: [io  0x164e-0x164f]
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x0200-0x020f] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0x0400-0x0453] has been reserved
system 00:05: [io  0x0458-0x047f] has been reserved
system 00:05: [io  0x0500-0x057f] has been reserved
system 00:05: [io  0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io  0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io  0x0454-0x0457]
system 00:07: [io  0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io  0x0010-0x001f]
pnp 00:08: [io  0x0022-0x003f]
pnp 00:08: [io  0x0044-0x005f]
pnp 00:08: [io  0x0072-0x007f]
pnp 00:08: [io  0x0080]
pnp 00:08: [io  0x0084-0x0086]
pnp 00:08: [io  0x0088]
pnp 00:08: [io  0x008c-0x008e]
pnp 00:08: [io  0x0090-0x009f]
pnp 00:08: [io  0x00a2-0x00bf]
pnp 00:08: [io  0x00e0-0x00ef]
pnp 00:08: [io  0x04d0-0x04d1]
pnp 00:08: [mem 0xff000000-0xff000fff]
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [mem 0xff000000-0xff000fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io  0x00f0-0x00ff]
pnp 00:09: [irq 13]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0a: [irq 12]
pnp 00:0a: Plug and Play ACPI device, IDs ETD010a PNP0f13 (active)
pnp 00:0b: [io  0x0060]
pnp 00:0b: [io  0x0064]
pnp 00:0b: [irq 1]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0c: [mem 0xfed10000-0xfed17fff]
pnp 00:0c: [mem 0xfed18000-0xfed18fff]
pnp 00:0c: [mem 0xfed19000-0xfed19fff]
pnp 00:0c: [mem 0xf8000000-0xfbffffff]
pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
pnp 00:0c: [mem 0xfed90000-0xfed93fff]
pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
pnp 00:0c: [mem 0xff010000-0xffffffff]
pnp 00:0c: [mem 0xfee00000-0xfeefffff]
pnp 00:0c: [mem 0xcf200000-0xcf200fff]
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff010000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0xcf200000-0xcf200fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x20000000-0x201fffff]
pnp 00:0d: [mem 0x40004000-0x40004fff]
system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
system 00:0d: [mem 0x40004000-0x40004fff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [mem 0xf7800000-0xf78fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xcf200000-0xfeafffff]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc4e9d000-0xc8e9cfff] (64MB) mapped at [ffff8800c4e9d000-ffff8800c8e9cfff]
audit: initializing netlink socket (disabled)
type=2000 audit(1359209235.672:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 15738
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xd0000000, mapped to 0xffffc9000a900000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (35 C)
ACPI: Battery Slot [BAT1] (battery present)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916100 irq 43
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7916000 port 0xf7916200 irq 43
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7918000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-22-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7917000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-22-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7900000
xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-22-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-22-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
  Magic number: 13:471:132
acpi device:07: hash matches
rtc_cmos 00:06: setting system clock to 2013-01-26 14:07:16 UTC (1359209236)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
[Firmware Bug]: battery: (dis)charge rate invalid.
ACPI: Battery Slot [BAT1] (battery present)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-8: WDC WD5000BPVT-80HXZT3, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-8 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ATAPI: Slimtype DVD A  DS8A8SH, KAA2, max UDMA/100
ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM            Slimtype DVD A  DS8A8SH   KAA2 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 932k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1464k freed
Freeing unused kernel memory: 1120k freed
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
Refined TSC clocksource calibration: 2294.787 MHz.
Switching to clocksource tsc
udevd[132]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[drm] Initialized drm 1.1.0 20060810
r8169 0000:02:00.0: irq 45 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc900040a2000, dc:0e:a1:c5:54:e7, XID 0c900800 IRQ 45
r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
checking generic (d0000000 300000) vs hw (0 0)
i915 0000:00:02.0: setting latency timer to 64
pci 0000:00:00.0: Intel Ivybridge Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 65536K stolen memory
usb 3-4: new high-speed USB device number 2 using xhci_hcd
i915 0000:00:02.0: irq 46 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
usb 3-4: New USB device found, idVendor=0bda, idProduct=0138
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: USB2.0-CRW
usb 3-4: Manufacturer: Generic
usb 3-4: SerialNumber: 20090516388200000
usb 3-4: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-4: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
Initializing USB Mass Storage driver...
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi6 : usb-storage 3-4:1.0
usbcore: registered new interface driver ums-realtek
usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
usb 1-1.4: New USB device found, idVendor=13d3, idProduct=5710
usb 1-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1.4: Product: USB 2.0 UVC VGA WebCam
usb 1-1.4: Manufacturer: Azurewave
usb 1-1.4: SerialNumber: 0x0001
usb 3-4: USB disconnect, device number 2
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
acpi device:1a: registered as cooling_device13
ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:18/LNXVIDEO:00/input/input5
acpi device:60: registered as cooling_device14
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
xor: automatically using best checksumming function:
   avx       : 19704.000 MB/sec
device-mapper: dm-raid45: initialized v0.2594b
EXT4-fs (sda4): INFO: recovery required on readonly filesystem
EXT4-fs (sda4): write access will be enabled during recovery
EXT4-fs (sda4): orphan cleanup on readonly fs
EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 1053760
EXT4-fs (sda4): 1 orphan inode deleted
EXT4-fs (sda4): recovery complete
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Adding 1999868k swap on /dev/sda6.  Priority:-1 extents:1 across:1999868k 
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[471]: starting version 175
lp: driver loaded but no devices found
wmi: Mapper loaded
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x1asus_wmi: BIOS WMI version: 7.8
asus_wmi: SFUN value: 0x4a0077[   18.520505] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input7
asus_wmi: Backlight controlled by ACPI video driver
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 47 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei 0000:00:16.0: wd: failed to find the client
ath9k 0000:03:00.0: enabling device (0000 -> 0002)
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc9000a980000, irq=17
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5710)
input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
device-mapper: multipath: version 1.4.0 loaded
type=1400 audit(1359216454.061:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=887 comm="apparmor_parser"
type=1400 audit(1359216454.061:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=705 comm="apparmor_parser"
type=1400 audit(1359216454.061:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=887 comm="apparmor_parser"
type=1400 audit(1359216454.061:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=887 comm="apparmor_parser"
type=1400 audit(1359216454.061:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=705 comm="apparmor_parser"
type=1400 audit(1359216454.061:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=705 comm="apparmor_parser"
type=1400 audit(1359216454.065:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=939 comm="apparmor_parser"
type=1400 audit(1359216454.065:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=936 comm="apparmor_parser"
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
microcode: Microcode Update Driver: v2.00 , Peter Oruba
usb 3-3: new high-speed USB device number 3 using xhci_hcd
usb 3-3: Device not responding to set address.
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
usb 3-3: Device not responding to set address.
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f01)
psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0c.
usb 3-3: device not accepting address 3, error -71
hub 3-0:1.0: unable to enumerate USB device on port 3
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input12
usb 3-3: new high-speed USB device number 5 using xhci_hcd
usb 3-3: New USB device found, idVendor=04cc, idProduct=1521
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 7 ports detected
usb 3-3.4: new high-speed USB device number 6 using xhci_hcd
usb 3-3.4: New USB device found, idVendor=152e, idProduct=1640
usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.4: Product: SuperMulti RW   
usb 3-3.4: Manufacturer: HLDS Inc
usb 3-3.4: SerialNumber: 00101016400016E25
usb 3-3.4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi7 : usb-storage 3-3.4:1.0
usb 3-3.7: new high-speed USB device number 7 using xhci_hcd
usb 3-3.7: New USB device found, idVendor=0409, idProduct=005a
usb 3-3.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3.7:1.0: USB hub found
hub 3-3.7:1.0: 4 ports detected
EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
usb 3-3.7.2: new high-speed USB device number 8 using xhci_hcd
usb 3-3.7.2: New USB device found, idVendor=13fd, idProduct=0841
usb 3-3.7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.7.2: Product: USB Mass Storage Device 
usb 3-3.7.2: Manufacturer: TSSTcorp
usb 3-3.7.2: SerialNumber: SATASLIM0000003b482
usb 3-3.7.2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.7.2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi8 : usb-storage 3-3.7.2:1.0
usb 3-3.7.4: new high-speed USB device number 9 using xhci_hcd
usb 3-3.7.4: Device not responding to set address.
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
usb 3-3.7.4: Device not responding to set address.
usb 3-3.7.4: device not accepting address 9, error -71
hub 3-3.7:1.0: cannot disable port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: Cannot enable port 4.  Maybe the USB cable is bad?
hub 3-3.7:1.0: cannot disable port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: Cannot enable port 4.  Maybe the USB cable is bad?
hub 3-3.7:1.0: cannot disable port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: cannot reset port 4 (err = -71)
hub 3-3.7:1.0: Cannot enable port 4.  Maybe the USB cable is bad?
hub 3-3.7:1.0: cannot disable port 4 (err = -71)
hub 3-3.7:1.0: unable to enumerate USB device on port 4
hub 3-3.7:1.0: cannot disable port 4 (err = -71)
usb 3-3: USB disconnect, device number 5
usb 3-3.4: USB disconnect, device number 6
usb 3-3.7: USB disconnect, device number 7
usb 3-3.7.2: USB disconnect, device number 8
usb 3-3: new high-speed USB device number 13 using xhci_hcd
usb 3-3: New USB device found, idVendor=04cc, idProduct=1521
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 7 ports detected
usb 3-3.4: new high-speed USB device number 14 using xhci_hcd
usb 3-3.4: Device not responding to set address.
usb 3-3.4: Device not responding to set address.
usb 3-3.4: device not accepting address 14, error -71
hub 3-3:1.0: hub_port_status failed (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: Cannot enable port 4.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: Cannot enable port 4.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
usb 3-3.4: new full-speed USB device number 17 using xhci_hcd
usb 3-3.4: not running at top speed; connect to a high speed hub
usb 3-3.4: New USB device found, idVendor=152e, idProduct=1640
usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.4: Product: SuperMulti RW   
usb 3-3.4: Manufacturer: HLDS Inc
usb 3-3.4: SerialNumber: 00101016400016E25
scsi9 : usb-storage 3-3.4:1.0
usb 3-3.7: new high-speed USB device number 18 using xhci_hcd
usb 3-3.7: Device not responding to set address.
usb 3-3.7: Device not responding to set address.
init: failsafe main process (1283) killed by TERM signal
usb 3-3.7: device not accepting address 18, error -71
hub 3-3:1.0: cannot disable port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 0, act. len = 4294967288
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
init: avahi-daemon main process (1417) terminated with status 127
init: avahi-daemon main process ended, respawning
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
hub 3-3:1.0: hub_port_status failed (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: Cannot enable port 7.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: Cannot enable port 7.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: Cannot enable port 7.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 7 (err = -71)
hub 3-3:1.0: unable to enumerate USB device on port 7
hub 3-3:1.0: cannot disable port 7 (err = -71)
usb 3-3: USB disconnect, device number 13
usb 3-3.4: USB disconnect, device number 17
type=1400 audit(1359216458.345:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1477 comm="apparmor_parser"
type=1400 audit(1359216458.345:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1477 comm="apparmor_parser"
ppdev: user-space parallel port driver
bbswitch: version 0.4.2
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
bbswitch: detected an Optimus _DSM function
bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
bbswitch: disabling discrete graphics
bbswitch: Result of Optimus _DSM call: 11000059
pci 0000:01:00.0: power state changed by ACPI to D3
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 3-3: new high-speed USB device number 22 using xhci_hcd
usb 3-3: New USB device found, idVendor=04cc, idProduct=1521
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 7 ports detected
cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
usb 3-3.4: new high-speed USB device number 23 using xhci_hcd
usb 3-3.4: Device not responding to set address.
usb 3-3.4: Device not responding to set address.
usb 3-3.4: device not accepting address 23, error -71
hub 3-3:1.0: cannot disable port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: Cannot enable port 4.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: Cannot enable port 4.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: Cannot enable port 4.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 4 (err = -71)
hub 3-3:1.0: unable to enumerate USB device on port 4
hub 3-3:1.0: cannot disable port 4 (err = -71)
hub 3-3:1.0: hub_port_status failed (err = -71)
usb 3-3: USB disconnect, device number 22
usb 3-3: new high-speed USB device number 27 using xhci_hcd
usb 3-3: New USB device found, idVendor=04cc, idProduct=1521
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 7 ports detected
usb 3-3.4: new high-speed USB device number 28 using xhci_hcd
usb 3-3.4: New USB device found, idVendor=152e, idProduct=1640
usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.4: Product: SuperMulti RW   
usb 3-3.4: Manufacturer: HLDS Inc
usb 3-3.4: SerialNumber: 00101016400016E25
usb 3-3.4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi10 : usb-storage 3-3.4:1.0
usb 3-3.7: new high-speed USB device number 29 using xhci_hcd
usb 3-3.7: New USB device found, idVendor=0409, idProduct=005a
usb 3-3.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3.7:1.0: USB hub found
hub 3-3.7:1.0: 4 ports detected
r8169 0000:02:00.0: eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 3-3.7.2: new high-speed USB device number 30 using xhci_hcd
usb 3-3.7.2: New USB device found, idVendor=13fd, idProduct=0841
usb 3-3.7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.7.2: Product: USB Mass Storage Device 
usb 3-3.7.2: Manufacturer: TSSTcorp
usb 3-3.7.2: SerialNumber: SATASLIM0000003b482
usb 3-3.7.2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.7.2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi11 : usb-storage 3-3.7.2:1.0
usb 3-3.7.4: new high-speed USB device number 31 using xhci_hcd
usb 3-3.7.4: New USB device found, idVendor=0409, idProduct=005a
usb 3-3.7.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3.7.4:1.0: USB hub found
hub 3-3.7.4:1.0: 4 ports detected
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x184 offMax=0x1212
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.6 (interface 0x001a0004).
scsi 10:0:0:0: CD-ROM            HL-DT-ST DVDRAM GE20NU10  EE05 PQ: 0 ANSI: 0
sr1: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
sr 10:0:0:0: Attached scsi CD-ROM sr1
sr 10:0:0:0: Attached scsi generic sg2 type 5
vboxpci: IOMMU not found (not registered)
scsi 11:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S084B  TS01 PQ: 0 ANSI: 0
sr2: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
sr 11:0:0:0: Attached scsi CD-ROM sr2
sr 11:0:0:0: Attached scsi generic sg3 type 5
ip_tables: (C) 2000-2006 Netfilter Core Team
init: plymouth-stop pre-start process (2577) terminated with status 1
usb 3-3.4: reset high-speed USB device number 28 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021ea2e400
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021ea2e440
usb 3-3.4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.4: reset high-speed USB device number 28 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021ea2e400
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021ea2e440
usb 3-3.4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 0, act. len = 4294967288
hub 3-3:1.0: hub_port_status failed (err = -71)
hub 3-3:1.0: hub_port_status failed (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: Cannot enable port 4.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: Cannot enable port 4.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: Cannot enable port 4.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: cannot reset port 4 (err = -71)
hub 3-3:1.0: Cannot enable port 4.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 4 (err = -71)
hub 3-3:1.0: cannot disable port 4 (err = -71)
sr 10:0:0:0: Device offlined - not ready after error recovery
hub 3-3:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
hub 3-3.7:1.0: cannot disable port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
hub 3-3.7:1.0: cannot disable port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
sr 10:0:0:0: rejecting I/O to offline device
hub 3-3.7:1.0: cannot disable port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 0, act. len = 4294967288
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
hub 3-3.7:1.0: cannot disable port 2 (err = -71)
hub 3-3.7:1.0: cannot disable port 2 (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
usb 3-3.4: USB disconnect, device number 28
usb 3-3.4: new high-speed USB device number 32 using xhci_hcd
usb 3-3.4: New USB device found, idVendor=152e, idProduct=1640
usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.4: Product: SuperMulti RW   
usb 3-3.4: Manufacturer: HLDS Inc
usb 3-3.4: SerialNumber: 00101016400016E25
usb 3-3.4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi12 : usb-storage 3-3.4:1.0
usb 3-3.7.2: USB disconnect, device number 30
usb 3-3.7.4: USB disconnect, device number 31
usb 3-3.7: reset high-speed USB device number 29 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880220940e80
usb 3-3.7.2: new high-speed USB device number 33 using xhci_hcd
usb 3-3.7.2: New USB device found, idVendor=13fd, idProduct=0841
usb 3-3.7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.7.2: Product: USB Mass Storage Device 
usb 3-3.7.2: Manufacturer: TSSTcorp
usb 3-3.7.2: SerialNumber: SATASLIM0000003b482
usb 3-3.7.2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.7.2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi13 : usb-storage 3-3.7.2:1.0
usb 3-3.7.4: new high-speed USB device number 34 using xhci_hcd
usb 3-3.7.4: New USB device found, idVendor=0409, idProduct=005a
usb 3-3.7.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3.7.4:1.0: USB hub found
hub 3-3.7.4:1.0: 4 ports detected
scsi 12:0:0:0: CD-ROM            HL-DT-ST DVDRAM GE20NU10  EE05 PQ: 0 ANSI: 0
sr1: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
sr 12:0:0:0: Attached scsi CD-ROM sr1
sr 12:0:0:0: Attached scsi generic sg2 type 5
scsi 13:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S084B  TS01 PQ: 0 ANSI: 0
sr2: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
sr 13:0:0:0: Attached scsi CD-ROM sr2
sr 13:0:0:0: Attached scsi generic sg3 type 5
usb 3-3.7.4.1: new low-speed USB device number 35 using xhci_hcd
usb 3-3.7.4.1: New USB device found, idVendor=04d9, idProduct=1603
usb 3-3.7.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.7.4.1: Product: USB Keyboard
usb 3-3.7.4.1: Manufacturer:  
usb 3-3.7.4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-3.7.4.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input:   USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.7/3-3.7.4/3-3.7.4.1/3-3.7.4.1:1.0/input/input13
hid-generic 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:14.0-3.7.4.1/input0
input:   USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.7/3-3.7.4/3-3.7.4.1/3-3.7.4.1:1.1/input/input14
hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:14.0-3.7.4.1/input1
hub 3-3:1.0: port 7 disabled by hub (EMI?), re-enabling...
usb 3-3.7: USB disconnect, device number 29
usb 3-3.7.2: USB disconnect, device number 33
usb 3-3.7.4: USB disconnect, device number 34
usb 3-3.7.4.1: USB disconnect, device number 35
hub 3-3:1.0: hub_port_status failed (err = -71)
usb 3-3.7: new high-speed USB device number 36 using xhci_hcd
usb 3-3.7: New USB device found, idVendor=0409, idProduct=005a
usb 3-3.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3.7:1.0: USB hub found
hub 3-3.7:1.0: 4 ports detected
usb 3-3.7.2: new high-speed USB device number 37 using xhci_hcd
usb 3-3.7.2: New USB device found, idVendor=13fd, idProduct=0841
usb 3-3.7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.7.2: Product: USB Mass Storage Device 
usb 3-3.7.2: Manufacturer: TSSTcorp
usb 3-3.7.2: SerialNumber: SATASLIM0000003b482
usb 3-3.7.2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.7.2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi14 : usb-storage 3-3.7.2:1.0
usb 3-3.7.4: new high-speed USB device number 38 using xhci_hcd
usb 3-3.7.4: New USB device found, idVendor=0409, idProduct=005a
usb 3-3.7.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3.7.4:1.0: USB hub found
hub 3-3.7.4:1.0: 4 ports detected
usb 3-3.4: reset high-speed USB device number 32 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021ee1db00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021ee1db40
usb 3-3.4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.7.4.1: new low-speed USB device number 39 using xhci_hcd
usb 3-3.7.4.1: New USB device found, idVendor=04d9, idProduct=1603
usb 3-3.7.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.7.4.1: Product: USB Keyboard
usb 3-3.7.4.1: Manufacturer:  
usb 3-3.7.4.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-3.7.4.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input:   USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.7/3-3.7.4/3-3.7.4.1/3-3.7.4.1:1.0/input/input15
hid-generic 0003:04D9:1603.0003: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:14.0-3.7.4.1/input0
input:   USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.7/3-3.7.4/3-3.7.4.1/3-3.7.4.1:1.1/input/input16
hid-generic 0003:04D9:1603.0004: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:14.0-3.7.4.1/input1
scsi 14:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S084B  TS01 PQ: 0 ANSI: 0
sr2: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
sr 14:0:0:0: Attached scsi CD-ROM sr2
sr 14:0:0:0: Attached scsi generic sg3 type 5
usb 3-3.4: USB disconnect, device number 32
hub 3-3:1.0: hub_port_status failed (err = -71)
hub 3-3:1.0: hub_port_status failed (err = -71)
hub 3-3:1.0: hub_port_status failed (err = -71)
hub 3-3:1.0: hub_port_status failed (err = -71)
hub 3-3:1.0: hub_port_status failed (err = -71)
hub 3-3:1.0: Cannot enable port 4.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 4 (err = -71)
hub 3-3:1.0: unable to enumerate USB device on port 4
usb 3-3.7: USB disconnect, device number 36
usb 3-3.7.2: USB disconnect, device number 37
usb 3-3.7.4: USB disconnect, device number 38
usb 3-3.7.4.1: USB disconnect, device number 39
hub 3-3:1.0: hub_port_status failed (err = -71)
hub 3-3:1.0: unable to enumerate USB device on port 7
hub 3-3:1.0: hub_port_status failed (err = -71)
usb 3-3.4: new high-speed USB device number 43 using xhci_hcd
usb 3-3.4: New USB device found, idVendor=152e, idProduct=1640
usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.4: Product: SuperMulti RW   
usb 3-3.4: Manufacturer: HLDS Inc
usb 3-3.4: SerialNumber: 00101016400016E25
usb 3-3.4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi15 : usb-storage 3-3.4:1.0
usb 3-3.7: new high-speed USB device number 44 using xhci_hcd
usb 3-3.7: New USB device found, idVendor=0409, idProduct=005a
usb 3-3.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3.7:1.0: USB hub found
hub 3-3.7:1.0: 4 ports detected
usb 3-3.7.2: new high-speed USB device number 45 using xhci_hcd
usb 3-3.7.2: Device not responding to set address.
usb 3-3.7.2: Device not responding to set address.
usb 3-3.7.2: device not accepting address 45, error -71
hub 3-3.7:1.0: cannot disable port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
hub 3-3.7:1.0: cannot disable port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
hub 3-3.7:1.0: cannot disable port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: cannot reset port 2 (err = -71)
hub 3-3.7:1.0: Cannot enable port 2.  Maybe the USB cable is bad?
hub 3-3.7:1.0: cannot disable port 2 (err = -71)
hub 3-3.7:1.0: unable to enumerate USB device on port 2
hub 3-3.7:1.0: cannot disable port 2 (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
usb 3-3.4: reset high-speed USB device number 43 using xhci_hcd
usb 3-3.4: Device not responding to set address.
usb 3-3.4: Device not responding to set address.
usb 3-3.4: device not accepting address 43, error -71
usb 3-3.4: USB disconnect, device number 43
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022125cf80
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88022125cfc0
hub 3-3:1.0: hub_port_status failed (err = -71)
hub_port_connect_change: 70 callbacks suppressed
hub 3-3:1.0: connect-debounce failed, port 4 disabled
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
usb 3-3.7: reset high-speed USB device number 44 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802211d0040
usb 3-3.7.2: new high-speed USB device number 49 using xhci_hcd
usb 3-3.7.2: New USB device found, idVendor=13fd, idProduct=0841
usb 3-3.7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.7.2: Product: USB Mass Storage Device 
usb 3-3.7.2: Manufacturer: TSSTcorp
usb 3-3.7.2: SerialNumber: SATASLIM0000003b482
usb 3-3.7.2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.7.2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi16 : usb-storage 3-3.7.2:1.0
usb 3-3.7.4: new high-speed USB device number 50 using xhci_hcd
usb 3-3.7.4: Device not responding to set address.
usb 3-3.7.4: New USB device found, idVendor=0409, idProduct=005a
usb 3-3.7.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3.7.4:1.0: USB hub found
hub 3-3.7.4:1.0: 4 ports detected
scsi 16:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S084B  TS01 PQ: 0 ANSI: 0
sr1: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
sr 16:0:0:0: Attached scsi CD-ROM sr1
sr 16:0:0:0: Attached scsi generic sg2 type 5
usb 3-3.7.2: USB disconnect, device number 49
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 4 ep 0 with no TDs queued?
usb 3-3.4: new high-speed USB device number 51 using xhci_hcd
usb 3-3.4: New USB device found, idVendor=152e, idProduct=1640
usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.4: Product: SuperMulti RW   
usb 3-3.4: Manufacturer: HLDS Inc
usb 3-3.4: SerialNumber: 00101016400016E25
usb 3-3.4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi17 : usb-storage 3-3.4:1.0
usb 3-3.7.4.2: new high-speed USB device number 52 using xhci_hcd
usb 3-3.7.4.2: New USB device found, idVendor=13fd, idProduct=0841
usb 3-3.7.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.7.4.2: Product: USB Mass Storage Device 
usb 3-3.7.4.2: Manufacturer: TSSTcorp
usb 3-3.7.4.2: SerialNumber: SATASLIM0000003b482
usb 3-3.7.4.2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.7.4.2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi18 : usb-storage 3-3.7.4.2:1.0
scsi 17:0:0:0: CD-ROM            HL-DT-ST DVDRAM GE20NU10  EE05 PQ: 0 ANSI: 0
sr1: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
sr 17:0:0:0: Attached scsi CD-ROM sr1
sr 17:0:0:0: Attached scsi generic sg2 type 5
scsi 18:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S084B  TS01 PQ: 0 ANSI: 0
sr2: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
sr 18:0:0:0: Attached scsi CD-ROM sr2
sr 18:0:0:0: Attached scsi generic sg3 type 5
usb 3-3.7.4.2: USB disconnect, device number 52
usb 3-3.7.4.1: new high-speed USB device number 53 using xhci_hcd
usb 3-3.7.4.1: New USB device found, idVendor=13fd, idProduct=0841
usb 3-3.7.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.7.4.1: Product: USB Mass Storage Device 
usb 3-3.7.4.1: Manufacturer: TSSTcorp
usb 3-3.7.4.1: SerialNumber: SATASLIM0000003b482
usb 3-3.7.4.1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.7.4.1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi19 : usb-storage 3-3.7.4.1:1.0
scsi 19:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S084B  TS01 PQ: 0 ANSI: 0
sr2: scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray
sr 19:0:0:0: Attached scsi CD-ROM sr2
sr 19:0:0:0: Attached scsi generic sg3 type 5
usb 3-3.7.3: new low-speed USB device number 54 using xhci_hcd
usb 3-3.7.3: New USB device found, idVendor=04d9, idProduct=1603
usb 3-3.7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.7.3: Product: USB Keyboard
usb 3-3.7.3: Manufacturer:  
usb 3-3.7.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-3.7.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input:   USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.7/3-3.7.3/3-3.7.3:1.0/input/input17
hid-generic 0003:04D9:1603.0005: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:14.0-3.7.3/input0
input:   USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.7/3-3.7.3/3-3.7.3:1.1/input/input18
hid-generic 0003:04D9:1603.0006: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:14.0-3.7.3/input1
usb 3-3.7.4.3: new low-speed USB device number 55 using xhci_hcd
usb 3-3.7.4.3: New USB device found, idVendor=093a, idProduct=2510
usb 3-3.7.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.7.4.3: Product: USB Optical Mouse
usb 3-3.7.4.3: Manufacturer: PixArt
usb 3-3.7.4.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.7/3-3.7.4/3-3.7.4.3/3-3.7.4.3:1.0/input/input19
hid-generic 0003:093A:2510.0007: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-3.7.4.3/input0
usb 3-3: USB disconnect, device number 27
usb 3-3.4: USB disconnect, device number 51
usb 3-3.7: USB disconnect, device number 44
usb 3-3.7.3: USB disconnect, device number 54
usb 3-3.7.4: USB disconnect, device number 50
usb 3-3.7.4.1: USB disconnect, device number 53
usb 3-3.7.4.3: USB disconnect, device number 55
usb 3-3: new high-speed USB device number 56 using xhci_hcd
usb 3-3: Device not responding to set address.
usb 3-3: Device not responding to set address.
usb 3-3: device not accepting address 56, error -71
hub 3-0:1.0: unable to enumerate USB device on port 3
usb 3-3: new high-speed USB device number 58 using xhci_hcd
usb 3-3: New USB device found, idVendor=04cc, idProduct=1521
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 7 ports detected
usb 3-3.4: new high-speed USB device number 59 using xhci_hcd
usb 3-3.4: New USB device found, idVendor=152e, idProduct=1640
usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.4: Product: SuperMulti RW   
usb 3-3.4: Manufacturer: HLDS Inc
usb 3-3.4: SerialNumber: 00101016400016E25
usb 3-3.4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi20 : usb-storage 3-3.4:1.0
hub 3-3:1.0: hub_port_status failed (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: Cannot enable port 7.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: Cannot enable port 7.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: cannot reset port 7 (err = -71)
hub 3-3:1.0: Cannot enable port 7.  Maybe the USB cable is bad?
hub 3-3:1.0: cannot disable port 7 (err = -71)
usb 3-3.7: new full-speed USB device number 63 using xhci_hcd
usb 3-3.7: not running at top speed; connect to a high speed hub
usb 3-3.7: New USB device found, idVendor=0409, idProduct=005a
usb 3-3.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-3.7: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 3-3.7:1.0: USB hub found
hub 3-3.7:1.0: 4 ports detected
usb 3-3.7.3: new low-speed USB device number 64 using xhci_hcd
usb 3-3.7.3: Device not responding to set address.
usb 3-3.7.3: Device not responding to set address.
usb 3-3.7.3: device not accepting address 64, error -71
hub 3-3.7:1.0: cannot disable port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
hub 3-3.7:1.0: cannot disable port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
hub 3-3.7:1.0: cannot disable port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: cannot reset port 3 (err = -71)
hub 3-3.7:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
hub 3-3.7:1.0: cannot disable port 3 (err = -71)
hub 3-3.7:1.0: unable to enumerate USB device on port 3
hub 3-3.7:1.0: cannot disable port 3 (err = -71)
hub 3-3.7:1.0: hub_port_status failed (err = -71)
usb 3-3: USB disconnect, device number 58
usb 3-3.4: USB disconnect, device number 59
usb 3-3.7: USB disconnect, device number 63
usb 3-3: new high-speed USB device number 68 using xhci_hcd
usb 3-3: New USB device found, idVendor=04cc, idProduct=1521
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 7 ports detected
usb 3-3.4: new high-speed USB device number 69 using xhci_hcd
usb 3-3.4: New USB device found, idVendor=152e, idProduct=1640
usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.4: Product: SuperMulti RW   
usb 3-3.4: Manufacturer: HLDS Inc
usb 3-3.4: SerialNumber: 00101016400016E25
usb 3-3.4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi21 : usb-storage 3-3.4:1.0
usb 3-3.7: new high-speed USB device number 70 using xhci_hcd
usb 3-3.7: New USB device found, idVendor=0409, idProduct=005a
usb 3-3.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3.7:1.0: USB hub found
hub 3-3.7:1.0: 4 ports detected
usb 3-3.7.3: new low-speed USB device number 71 using xhci_hcd
usb 3-3.7.3: New USB device found, idVendor=04d9, idProduct=1603
usb 3-3.7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.7.3: Product: USB Keyboard
usb 3-3.7.3: Manufacturer:  
usb 3-3.7.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-3.7.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input:   USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.7/3-3.7.3/3-3.7.3:1.0/input/input20
hid-generic 0003:04D9:1603.0008: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:14.0-3.7.3/input0
input:   USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.7/3-3.7.3/3-3.7.3:1.1/input/input21
hid-generic 0003:04D9:1603.0009: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:14.0-3.7.3/input1
usb 3-3.7.4: new high-speed USB device number 72 using xhci_hcd
usb 3-3.7.4: New USB device found, idVendor=0409, idProduct=005a
usb 3-3.7.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3.7.4:1.0: USB hub found
hub 3-3.7.4:1.0: 4 ports detected
usb 3-3.7.4.1: new high-speed USB device number 73 using xhci_hcd
usb 3-3.7.4.1: New USB device found, idVendor=13fd, idProduct=0841
usb 3-3.7.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.7.4.1: Product: USB Mass Storage Device 
usb 3-3.7.4.1: Manufacturer: TSSTcorp
usb 3-3.7.4.1: SerialNumber: SATASLIM0000003b482
usb 3-3.7.4.1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.7.4.1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi22 : usb-storage 3-3.7.4.1:1.0
usb 3-3.7.4.3: new low-speed USB device number 74 using xhci_hcd
usb 3-3.7.4.3: New USB device found, idVendor=093a, idProduct=2510
usb 3-3.7.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.7.4.3: Product: USB Optical Mouse
usb 3-3.7.4.3: Manufacturer: PixArt
usb 3-3.7.4.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.7/3-3.7.4/3-3.7.4.3/3-3.7.4.3:1.0/input/input22
hid-generic 0003:093A:2510.000A: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-3.7.4.3/input0
scsi 21:0:0:0: CD-ROM            HL-DT-ST DVDRAM GE20NU10  EE05 PQ: 0 ANSI: 0
sr1: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
sr 21:0:0:0: Attached scsi CD-ROM sr1
sr 21:0:0:0: Attached scsi generic sg2 type 5
scsi 22:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S084B  TS01 PQ: 0 ANSI: 0
sr2: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
sr 22:0:0:0: Attached scsi CD-ROM sr2
sr 22:0:0:0: Attached scsi generic sg3 type 5
usb 3-3.7.4.3: USB disconnect, device number 74
usb 3-3.7.3: USB disconnect, device number 71
hub 3-3.7.4:1.0: cannot reset port 1 (err = -71)
hub 3-3.7.4:1.0: cannot reset port 1 (err = -71)
hub 3-3.7.4:1.0: cannot reset port 1 (err = -71)
hub 3-3.7.4:1.0: cannot reset port 1 (err = -71)
hub 3-3.7.4:1.0: cannot reset port 1 (err = -71)
hub 3-3.7.4:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 3-3.7.4:1.0: cannot disable port 1 (err = -71)
hub 3-3.7.4:1.0: cannot reset port 1 (err = -71)
hub 3-3.7.4:1.0: cannot reset port 1 (err = -71)
hub 3-3.7.4:1.0: cannot reset port 1 (err = -71)
hub 3-3.7.4:1.0: cannot reset port 1 (err = -71)
hub 3-3.7.4:1.0: cannot reset port 1 (err = -71)
hub 3-3.7.4:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
hub 3-3.7.4:1.0: cannot disable port 1 (err = -71)
xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 0, act. len = 4294967288
hub 3-3.7.4:1.0: hub_port_status failed (err = -71)
hub 3-3.7.4:1.0: cannot reset port 1 (err = -71)
usb 3-3.7: USB disconnect, device number 70
usb 3-3.7.4: USB disconnect, device number 72
usb 3-3.7.4.1: USB disconnect, device number 73
hub 3-3.7.4:1.0: cannot reset port 1 (err = -71)
hub 3-3.7.4:1.0: cannot reset port 1 (err = -19)
hub 3-3.7.4:1.0: cannot disable port 1 (err = -19)
hub 3-3.7.4:1.0: cannot disable port 1 (err = -19)
usb 3-3.7: new high-speed USB device number 75 using xhci_hcd
usb 3-3.7: New USB device found, idVendor=0409, idProduct=005a
usb 3-3.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3.7:1.0: USB hub found
hub 3-3.7:1.0: 4 ports detected
usb 3-3.7.4: new high-speed USB device number 76 using xhci_hcd
usb 3-3.7.4: New USB device found, idVendor=0409, idProduct=005a
usb 3-3.7.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-3.7.4:1.0: USB hub found
hub 3-3.7.4:1.0: 4 ports detected
usb 3-3.4: reset high-speed USB device number 69 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880223a26100
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880223a26140
usb 3-3.4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.7.4.1: new high-speed USB device number 77 using xhci_hcd
usb 3-3.7.4.1: New USB device found, idVendor=13fd, idProduct=0841
usb 3-3.7.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.7.4.1: Product: USB Mass Storage Device 
usb 3-3.7.4.1: Manufacturer: TSSTcorp
usb 3-3.7.4.1: SerialNumber: SATASLIM0000003b482
usb 3-3.7.4.1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.7.4.1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi23 : usb-storage 3-3.7.4.1:1.0
scsi 23:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S084B  TS01 PQ: 0 ANSI: 0
sr2: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
sr 23:0:0:0: Attached scsi CD-ROM sr2
sr 23:0:0:0: Attached scsi generic sg3 type 5
usb 3-3.5: new low-speed USB device number 78 using xhci_hcd
usb 3-3.5: New USB device found, idVendor=04d9, idProduct=1603
usb 3-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.5: Product: USB Keyboard
usb 3-3.5: Manufacturer:  
usb 3-3.5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-3.5: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input:   USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.5/3-3.5:1.0/input/input23
hid-generic 0003:04D9:1603.000B: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:14.0-3.5/input0
input:   USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.5/3-3.5:1.1/input/input24
hid-generic 0003:04D9:1603.000C: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:14.0-3.5/input1
usb 3-3.6: new low-speed USB device number 79 using xhci_hcd
usb 3-3.6: New USB device found, idVendor=093a, idProduct=2510
usb 3-3.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3.6: Product: USB Optical Mouse
usb 3-3.6: Manufacturer: PixArt
usb 3-3.6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.6/3-3.6:1.0/input/input25
hid-generic 0003:093A:2510.000D: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-3.6/input0
usb 3-3.7.4.1: USB disconnect, device number 77
usb 3-3.7.1: new high-speed USB device number 80 using xhci_hcd
usb 3-3.7.1: New USB device found, idVendor=13fd, idProduct=0841
usb 3-3.7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.7.1: Product: USB Mass Storage Device 
usb 3-3.7.1: Manufacturer: TSSTcorp
usb 3-3.7.1: SerialNumber: SATASLIM0000003b482
usb 3-3.7.1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.7.1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi24 : usb-storage 3-3.7.1:1.0
scsi 24:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S084B  TS01 PQ: 0 ANSI: 0
sr2: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
sr 24:0:0:0: Attached scsi CD-ROM sr2
sr 24:0:0:0: Attached scsi generic sg3 type 5
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-1: New USB device found, idVendor=0bc2, idProduct=3320
usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 4-1: Product: Expansion Desk
usb 4-1: Manufacturer: Seagate
usb 4-1: SerialNumber: NA4J73D4
scsi25 : usb-storage 4-1:1.0
scsi 25:0:0:0: Direct-Access     Seagate  Expansion Desk   070B PQ: 0 ANSI: 6
sd 25:0:0:0: Attached scsi generic sg4 type 0
sd 25:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 25:0:0:0: [sdb] Write Protect is off
sd 25:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 25:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 25:0:0:0: [sdb] Attached SCSI disk
usb 4-1: USB disconnect, device number 2
sd 25:0:0:0: [sdb] Synchronizing SCSI cache
sd 25:0:0:0: [sdb]  
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 4-1: Set SEL for device-initiated U1 failed.
usb 4-1: Set SEL for device-initiated U2 failed.
type=1400 audit(1359216852.156:35): apparmor="DENIED" operation="open" parent=3886 profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/3888/task/3921/mem" pid=3921 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
wlan0: authenticate with 1c:7e:e5:e0:f9:06
wlan0: send auth to 1c:7e:e5:e0:f9:06 (try 1/3)
wlan0: authenticated
wlan0: associate with 1c:7e:e5:e0:f9:06 (try 1/3)
wlan0: RX AssocResp from 1c:7e:e5:e0:f9:06 (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: Disabling freq 2467 MHz
cfg80211: Disabling freq 2472 MHz
cfg80211: Disabling freq 2484 MHz
ath: regdomain 0x8348 updated by CountryIE
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
cfg80211: Regulatory domain changed to country: US
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
usb 3-2: new high-speed USB device number 81 using xhci_hcd
usb 3-2: New USB device found, idVendor=0bc2, idProduct=3320
usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 3-2: Product: Expansion Desk
usb 3-2: Manufacturer: Seagate
usb 3-2: SerialNumber: NA4J73D4
usb 3-2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi26 : usb-storage 3-2:1.0
type=1400 audit(1359216854.267:36): apparmor="DENIED" operation="open" parent=3923 profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/3925/task/3979/mem" pid=3979 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
scsi 26:0:0:0: Direct-Access     Seagate  Expansion Desk   070B PQ: 0 ANSI: 6
sd 26:0:0:0: Attached scsi generic sg4 type 0
sd 26:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 26:0:0:0: [sdb] Write Protect is off
sd 26:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 26:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 26:0:0:0: [sdb] Attached SCSI disk
type=1400 audit(1359216856.311:37): apparmor="DENIED" operation="open" parent=3980 profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/3982/task/4102/mem" pid=4102 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
type=1400 audit(1359216857.854:38): apparmor="DENIED" operation="open" parent=4103 profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/4105/task/4135/mem" pid=4135 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
type=1400 audit(1359216868.912:39): apparmor="DENIED" operation="open" parent=4437 profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/4468/task/4604/mem" pid=4604 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
type=1400 audit(1359216870.943:40): apparmor="DENIED" operation="open" parent=4605 profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/4607/task/4819/mem" pid=4819 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
type=1400 audit(1359216872.480:41): apparmor="DENIED" operation="open" parent=4820 profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/4822/task/4846/mem" pid=4846 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
type=1400 audit(1359216874.021:42): apparmor="DENIED" operation="open" parent=4847 profile="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" name="/proc/4849/task/4877/mem" pid=4877 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
asus_wmi: Unknown key 74 pressed
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 1c:7e:e5:e0:f9:06
wlan0: send auth to 1c:7e:e5:e0:f9:06 (try 1/3)
wlan0: send auth to 1c:7e:e5:e0:f9:06 (try 2/3)
wlan0: send auth to 1c:7e:e5:e0:f9:06 (try 3/3)
wlan0: authentication with 1c:7e:e5:e0:f9:06 timed out
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
device vboxnet0 entered promiscuous mode
device eth0 entered promiscuous mode
EXT4-fs (sda8): Unaligned AIO/DIO on inode 17170479 by AioMgr0-N; performance will be poor.
bbswitch: enabling discrete graphics
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: enabling device (0006 -> 0007)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: enabling device (0006 -> 0007)
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.64  Tue Oct 30 10:58:20 PDT 2012
------------[ cut here ]------------
WARNING: at /build/buildd/linux-3.5.0/arch/x86/mm/ioremap.c:102 __ioremap_caller+0x335/0x380()
Hardware name: K45VM
Modules linked in: nvidia(PO) hid_generic usbhid hid xt_multiport iptable_filter ip_tables x_tables pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bbswitch(O) parport_pc ppdev bnep rfcomm bluetooth binfmt_misc nls_iso8859_1 dm_crypt joydev snd_hda_codec_hdmi snd_hda_codec_realtek dm_multipath scsi_dh coretemp kvm_intel kvm uvcvideo videobuf2_core videodev videobuf2_vmalloc videobuf2_memops snd_hda_intel snd_hda_codec snd_hwdep microcode snd_pcm snd_seq_midi snd_rawmidi arc4 snd_seq_midi_event snd_seq snd_timer snd_seq_device ath9k psmouse mac80211 serio_raw ath9k_common ath9k_hw ath cfg80211 lpc_ich snd mei soundcore snd_page_alloc asus_nb_wmi asus_wmi sparse_keymap mxm_wmi wmi mac_hid lp parport dm_raid45 xor dm_mirror dm_region_hash dm_log ums_realtek uas usb_storage ghash_clmulni_intel aesni_intel cryptd aes_x86_64 i915 drm_kms_helper r8169 drm i2c_algo_bit video
Pid: 9886, comm: Xorg Tainted: P           O 3.5.0-22-generic #34-Ubuntu
Call Trace:
 [] warn_slowpath_common+0x7f/0xc0
 [] warn_slowpath_null+0x1a/0x20
 [] __ioremap_caller+0x335/0x380
 [] ? os_map_kernel_space+0x85/0xf0 [nvidia]
 [] ioremap_cache+0x14/0x20
 [] os_map_kernel_space+0x85/0xf0 [nvidia]
 [] _nv014928rm+0x76/0x92 [nvidia]
 [] ? _nv009712rm+0x89/0x140 [nvidia]
 [] ? _nv014499rm+0xb8/0x102 [nvidia]
 [] ? _nv014537rm+0x58/0x9e [nvidia]
 [] ? _nv014509rm+0xbe/0x2f0 [nvidia]
 [] ? _nv014542rm+0xab/0x174 [nvidia]
 [] ? _nv014508rm+0x50/0x5d [nvidia]
 [] ? _nv014483rm+0x82d/0x96b [nvidia]
 [] ? _nv012703rm+0x174/0x573 [nvidia]
 [] ? _nv012703rm+0xf2/0x573 [nvidia]
 [] ? _nv004024rm+0x1bb/0x19e9 [nvidia]
 [] ? _nv004049rm+0x8709/0xaef0 [nvidia]
 [] ? _nv004049rm+0x705f/0xaef0 [nvidia]
 [] ? _nv010019rm+0x25/0x40 [nvidia]
 [] ? _nv014983rm+0x7c9/0x943 [nvidia]
 [] ? _nv001097rm+0x42b/0x661 [nvidia]
 [] ? rm_init_adapter+0xac/0x146 [nvidia]
 [] ? nv_kern_open+0x4b4/0x800 [nvidia]
 [] ? chrdev_open+0xaf/0x1a0
 [] ? __dentry_open+0x21f/0x330
 [] ? cdev_put+0x30/0x30
 [] ? vfs_open+0x3a/0x40
 [] ? nameidata_to_filp+0x58/0xb0
 [] ? do_last+0x49f/0xa10
 [] ? apparmor_file_alloc_security+0x2c/0x60
 [] ? path_openat+0xd9/0x430
 [] ? security_capable+0x18/0x20
 [] ? ns_capable+0x2d/0x60
 [] ? do_filp_open+0x41/0xa0
 [] ? alloc_fd+0xc6/0x110
 [] ? do_sys_open+0xf5/0x230
 [] ? mntput+0x24/0x40
 [] ? sys_open+0x21/0x30
 [] ? system_call_fastpath+0x16/0x1b
---[ end trace 974f5bc347fb8a9c ]---
bbswitch: disabling discrete graphics
bbswitch: Result of Optimus _DSM call: 11000059
pci 0000:01:00.0: Refused to change power state, currently in D0
pci 0000:01:00.0: power state changed by ACPI to D3
bbswitch: enabling discrete graphics
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.64  Tue Oct 30 10:58:20 PDT 2012
device eth0 left promiscuous mode
vboxnetflt: dropped 0 out of 48879 packets
device vboxnet0 left promiscuous mode
vboxnetflt: dropped 0 out of 29 packets
bbswitch: disabling discrete graphics
bbswitch: Result of Optimus _DSM call: 11000059
pci 0000:01:00.0: Refused to change power state, currently in D0
pci 0000:01:00.0: power state changed by ACPI to D3
bbswitch: enabling discrete graphics
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.64  Tue Oct 30 10:58:20 PDT 2012
bbswitch: disabling discrete graphics
bbswitch: Result of Optimus _DSM call: 11000059
pci 0000:01:00.0: Refused to change power state, currently in D0
pci 0000:01:00.0: power state changed by ACPI to D3
bbswitch: enabling discrete graphics
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.64  Tue Oct 30 10:58:20 PDT 2012
bbswitch: disabling discrete graphics
bbswitch: Result of Optimus _DSM call: 11000059
pci 0000:01:00.0: Refused to change power state, currently in D0
pci 0000:01:00.0: power state changed by ACPI to D3
bbswitch: enabling discrete graphics
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.64  Tue Oct 30 10:58:20 PDT 2012
bbswitch: disabling discrete graphics
bbswitch: Result of Optimus _DSM call: 11000059
pci 0000:01:00.0: Refused to change power state, currently in D0
pci 0000:01:00.0: power state changed by ACPI to D3
bbswitch: enabling discrete graphics
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.64  Tue Oct 30 10:58:20 PDT 2012
bbswitch: disabling discrete graphics
bbswitch: Result of Optimus _DSM call: 11000059
pci 0000:01:00.0: Refused to change power state, currently in D0
pci 0000:01:00.0: power state changed by ACPI to D3
CPU0: Package power limit notification (total events = 1)
CPU4: Package power limit notification (total events = 1)
CPU3: Package power limit notification (total events = 1)
CPU7: Package power limit notification (total events = 1)
CPU2: Package power limit notification (total events = 1)
CPU1: Package power limit notification (total events = 1)
CPU6: Package power limit notification (total events = 1)
CPU5: Package power limit notification (total events = 1)
CPU3: Package power limit normal
CPU2: Package power limit normal
CPU5: Package power limit normal
CPU1: Package power limit normal
CPU6: Package power limit normal
CPU7: Package power limit normal
CPU4: Package power limit normal
CPU0: Package power limit normal
device vboxnet0 entered promiscuous mode
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
vboxnetflt: dropped 0 out of 1180169 packets
device vboxnet0 left promiscuous mode
vboxnetflt: dropped 42832 out of 43174 packets
usb 3-2: USB disconnect, device number 81
sd 26:0:0:0: [sdb] Synchronizing SCSI cache
sd 26:0:0:0: [sdb]  
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 3-4: new high-speed USB device number 82 using xhci_hcd
usb 3-4: New USB device found, idVendor=0bda, idProduct=0138
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: USB2.0-CRW
usb 3-4: Manufacturer: Generic
usb 3-4: SerialNumber: 20090516388200000
usb 3-4: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-4: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi27 : usb-storage 3-4:1.0
scsi 27:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
sd 27:0:0:0: Attached scsi generic sg4 type 0
sd 27:0:0:0: [sdb] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
sd 27:0:0:0: [sdb] Write Protect is off
sd 27:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 27:0:0:0: [sdb] No Caching mode page present
sd 27:0:0:0: [sdb] Assuming drive cache: write through
sd 27:0:0:0: [sdb] No Caching mode page present
sd 27:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 27:0:0:0: [sdb] No Caching mode page present
sd 27:0:0:0: [sdb] Assuming drive cache: write through
sd 27:0:0:0: [sdb] Attached SCSI removable disk
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 1 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 0 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 1 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 0 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 1 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 0 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 1 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 0 with no TDs queued?
device vboxnet0 entered promiscuous mode
device eth0 entered promiscuous mode
EXT4-fs (sda8): Unaligned AIO/DIO on inode 17170479 by AioMgr0-N; performance will be poor.
device eth0 left promiscuous mode
vboxnetflt: dropped 0 out of 274241 packets
device vboxnet0 left promiscuous mode
vboxnetflt: dropped 0 out of 227 packets
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 4 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 1 with no TDs queued?
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 12 ep 0 with no TDs queued?
usb 3-4: USB disconnect, device number 82
usb 3-4: new high-speed USB device number 83 using xhci_hcd
usb 3-4: New USB device found, idVendor=0bda, idProduct=0138
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: USB2.0-CRW
usb 3-4: Manufacturer: Generic
usb 3-4: SerialNumber: 20090516388200000
usb 3-4: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-4: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi28 : usb-storage 3-4:1.0
usb 3-4: USB disconnect, device number 83
usb 3-3.7.4.4: new high-speed USB device number 84 using xhci_hcd
usb 3-3.7.4.4: New USB device found, idVendor=13fe, idProduct=3e00
usb 3-3.7.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3.7.4.4: Product: USB DISK 2.0
usb 3-3.7.4.4: Manufacturer:         
usb 3-3.7.4.4: SerialNumber: 7FC20100349F07A5
usb 3-3.7.4.4: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-3.7.4.4: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi29 : usb-storage 3-3.7.4.4:1.0
scsi 29:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
sd 29:0:0:0: Attached scsi generic sg4 type 0
sd 29:0:0:0: [sdb] 30277632 512-byte logical blocks: (15.5 GB/14.4 GiB)
sd 29:0:0:0: [sdb] Write Protect is off
sd 29:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 29:0:0:0: [sdb] No Caching mode page present
sd 29:0:0:0: [sdb] Assuming drive cache: write through
sd 29:0:0:0: [sdb] No Caching mode page present
sd 29:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 29:0:0:0: [sdb] No Caching mode page present
sd 29:0:0:0: [sdb] Assuming drive cache: write through
sd 29:0:0:0: [sdb] Attached SCSI removable disk
usb 3-4: new high-speed USB device number 85 using xhci_hcd
usb 3-4: New USB device found, idVendor=0bda, idProduct=0138
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: USB2.0-CRW
usb 3-4: Manufacturer: Generic
usb 3-4: SerialNumber: 20090516388200000
usb 3-4: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-4: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi30 : usb-storage 3-4:1.0
usb 3-4: USB disconnect, device number 85
usb 3-4: new high-speed USB device number 86 using xhci_hcd
usb 3-4: New USB device found, idVendor=0bda, idProduct=0138
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: USB2.0-CRW
usb 3-4: Manufacturer: Generic
usb 3-4: SerialNumber: 20090516388200000
usb 3-4: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-4: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
scsi31 : usb-storage 3-4:1.0
scsi 31:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
sd 31:0:0:0: Attached scsi generic sg5 type 0
usb 3-4: USB disconnect, device number 86
sd 31:0:0:0: [sdc] READ CAPACITY failed
sd 31:0:0:0: [sdc]  
Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 31:0:0:0: [sdc] Sense not available.
sd 31:0:0:0: [sdc] Write Protect is off
sd 31:0:0:0: [sdc] Mode Sense: 2e 2e 2f 2e
sd 31:0:0:0: [sdc] No Caching mode page present
sd 31:0:0:0: [sdc] Assuming drive cache: write through
sd 31:0:0:0: [sdc] Attached SCSI removable disk
ubuntu-webapps-[24826]: segfault at 0 ip 00000000004027b0 sp 00007fff46bb4cf0 error 4 in ubuntu-webapps-update-index[400000+4000]
CPU1: Package power limit notification (total events = 2)
CPU3: Package power limit notification (total events = 2)
CPU6: Package power limit notification (total events = 2)
CPU2: Package power limit notification (total events = 2)
CPU5: Package power limit notification (total events = 2)
CPU7: Package power limit notification (total events = 2)
CPU4: Package power limit notification (total events = 2)
CPU0: Package power limit notification (total events = 2)
CPU2: Package power limit normal
CPU4: Package power limit normal
CPU1: Package power limit normal
CPU0: Package power limit normal
CPU5: Package power limit normal
CPU6: Package power limit normal
CPU7: Package power limit normal
CPU3: Package power limit normal

Return To ASUS K45VM System Information